开机每次自检都the volume is dirty，已解决

yuyando

有一段时间了，每次启动，本本自检-----之后就是关于the volume is dirty的一些数据，只是检测，不见提示修复，不想再看到它的，有解决办法吗，按网上的输入了一个xxxx运行之后提示“-d盘已损坏”也不知道怎办了，

[ 本帖最后由 yuyando 于 2007-7-10 18:17 编辑 ]

yuyando

事件类型:        错误
事件来源:        Ntfs
事件种类:        磁盘
事件 ID:        55
日期:                2007-7-7
事件:                11:35:18
用户:                N/A
计算机:        LENOVO-B9B16E97
描述:
磁盘上的文件系统结构已损坏，不能使用。 请在卷 D: 上运行 chkdsk 实用程序。

有关更多信息，请参阅在 http://go.microsoft.com/fwlink/events.asp 的帮助和支持中心。
数据:
0000: 0d 00 00 00 02 00 4e 00   ......N.
0008: 02 00 00 00 37 00 04 c0   ....7..À
0010: 00 00 00 00 32 00 00 c0   ....2..À
0018: 00 00 00 00 00 00 00 00   ........
0020: 00 00 00 00 00 00 00 00   ........

[ 本帖最后由 yuyando 于 2007-7-7 12:28 编辑 ]

yuyando

事件类型:        错误
事件来源:        Cdrom
事件种类:        无
事件 ID:        7
日期:                2007-7-6
事件:                17:48:08
用户:                N/A
计算机:        LENOVO-B9B16E97
描述:
设备 \Device\CdRom0 有一个不正确的区块。

有关更多信息，请参阅在 http://go.microsoft.com/fwlink/events.asp 的帮助和支持中心。
数据:
0000: 03 01 68 00 01 00 b8 00   ..h...¸.
0008: 00 00 00 00 07 00 04 c0   .......À
0010: 00 01 00 00 00 00 00 00   ........
0018: 00 00 00 00 00 00 00 00   ........
0020: 00 d0 0c 00 00 00 00 00   .Ð......
0028: 96 54 01 00 00 00 00 00   –T......
0030: ff ff ff ff 03 00 00 00   ÿÿÿÿ....
0038: 40 00 00 c4 02 00 00 00   @..Ä....
0040: ff 20 0a 12 4c 02 00 40   ÿ ..L..@
0048: 00 00 00 00 0a 00 00 00   ........
0050: 00 00 00 00 38 d2 df 82   ....8Òß‚
0058: 00 00 00 00 08 f0 cf 82   .....ðÏ‚
0060: 02 00 00 00 9a 01 00 00   ....š...
0068: 28 00 00 00 01 9a 00 00   (....š..
0070: 01 00 00 00 00 00 00 00   ........
0078: 70 00 03 00 00 00 00 0a   p.......
0080: 00 00 00 00 02 00 00 00   ........
0088: 00 00 00 00 00 00 00 00   ........

毒来啦

可以在这里进行修复1

Nerazzurri

有没有使用系统自带的工具修复下看看？

yuyando

楼上两位，那个修复运行了也没解决问题的----昨天试过了，只能送修了吗才几个月的本啊

[ 本帖最后由 yuyando 于 2007-7-7 12:37 编辑 ]

PPwangS

几个月？好，立刻找售后，买的东西资源不能浪费

说正事。

这个，是不是系统时候总是检测D盘，直接把自检给屏蔽了。。

yuyando

看来得找维修部了 ， 就去打电话的

yuyando

what you're experiencing is what Windows refers to as "setting the dirty bit" and what you have to do is unset that bit. Every time Windows XP starts, autochk.exe is called by the kernel to scan all volumes to check if the volume dirty bit is set. If the dirty bit is set, autochk performs an immediate chkdsk /f on that volume. Chkdsk /f verifies file system integrity and attempts to fix any problems with the volume. It is usually caused by a hard shut down or a power loss during a read-right operation on that particular drive.

How do I fix it, you ask?

Well, that's easy. First click Start> Run> bring up a command prompt by typing in "CMD" and type " fsutil dirty query d: ". This queries the drive, and more than likely it will tell you that it is dirty. Next, type "CHKNTFS /X D:". The X tells Windows to NOT check that particular drive on the next reboot. At this time, manually reboot your computer, it should not do a Chkdsk and take you directly to Windows.

Once Windows has fully loaded, bring up another CMD prompt and type and now you want to do a Chkdsk manually by typing "Chkdsk /f /r d:". This should take you through 5 stages of the scan and will unset that dirty bit. Finally, type "fsutil dirty query d:" and Windows will confirm that the dirty bit is not set on that drive.

HorseLuke

原帖由 yuyando 于 2007-7-9 15:36 发表
what you're experiencing is what Windows refers to as "setting the dirty bit" and what you have to do is unset that bit. Every time Windows XP starts, autochk.exe is called by the kernel to scan  ...

能否说说这篇文章的出处在哪？