英文比较长，其实也不难，有兴趣的朋友，可以翻译成中文
Upgrading to version 7.0, How to avoid most issue's when upgrading
Installing version 7.0
If you upgrading to 7.0 from version 6.0, then i would strongly recommend that you uninstall 6.0 or any other previous version (this includes AV's from other vendors!)....... completely only keeping the activationdata of the possiblities you have to save data when you uninstall 6.0. If you previously have had other anti-viruses installed then I would recommend you have a look at this sticky, Norton removal steps are very important even after you have removed normally via add/remove programs!
If you have problems uninstalling Kaspersky, then you have removaltools you can use to remove remnants, for 6.0:
1. Download KisKav6Remove.zip
2. Unpack the downloaded archive KisKav6Remove.zip to a folder, boot into safemode and run the file KisKav6Remove.exe. When the utility finishes its work, restart the computer in the normal mode. Only works if installed in the default c:\ location with windows!
3. Now boot into normalmode.
For Kaspersky 5.0 you can download the tool here, for 4.0/4.5 here. Both these tools also is more effective in safemode.
Safemode:
Windows 98/Me
Restart the computer.
Just after the POST diagnostics and memory count, start pressing the F8 key
On the Startup Menu, choose Safe Mode
or you may use the System Configuration Utility Method.
While in Normal mode, Close all programs.
Click Start, Run and type MSCONFIG in the box and click OK
In the System Configuration Utility, on the General Tab, click the Advanced Button
In the Advanced Troubleshooting Settings dialog box, check Enable Startup Menu. Click OK. Click OK again when the System Configuration Utility reappears.
You will be prompted to restart the computer. Click Yes. The computer will restart in Safe mode.
When you are finished with troubleshooting in Safe mode, open MSCONFIG again and uncheck "Enable Start-up Menu." under the Advanced Menu, then click OK and restart your computer
Windows 2000
If the computer is running, shut down Windows, and then turn off the power
Wait 30 seconds, and then turn the computer on.
When you see the black-and-white Starting Windows bar at the bottom of the screen, start tapping the F8 key. The Windows 2000 Advanced Options Menu appears.
Ensure that the Safe mode option is selected. In most cases, it is the first item in the list and is selected by default.
Press Enter. The computer then begins to start in Safe mode.
When you are finished with all troubleshooting, close all programs and restart the computer as you normally would.
Windows XP
If Windows XP is the only operating system installed on your computer, booting into Safe Mode with these instructions.
If the computer is running, shut down Windows, and then turn off the power
Wait 30 seconds, and then turn the computer on.
Start tapping the F8 key. The Windows Advanced Options Menu appears. If you begin tapping the F8 key too soon, some computers display a "keyboard error" message. To resolve this, restart the computer and try again.
Ensure that the Safe mode option is selected.
Press Enter. The computer then begins to start in Safe mode.
When you are finished with all troubleshooting, close all programs and restart the computer as you normally would.
To use the System Configuration Utility method
Close all open programs.
Click Start, Run and type MSCONFIG in the box and click OK
The System Configuration Utility appears, On the BOOT.INI tab, Check the "/SAFEBOOT" option, and then click OK and Restart your computer when prompted.
The computer restarts in Safe mode.
Perform the troubleshooting steps for which you are using Safe Mode.
When you are finished with troubleshooting in Safe mode, open MSCONFIG again, on the BOOT.INI tab, uncheck "/SAFEBOOT" and click OK to restart your computer
[ 本帖最后由 blog 于 2007-7-29 20:32 编辑 ] |
[复制链接]
发表于 2007-7-29 19:22:04
发表于 2007-7-29 19:44:17
发表于 2007-7-29 20:10:31
卡巴和铁壳有仇？....人家的东西难卸载也不用这么写啊....
楼主
卸载是个问题....如果铁壳不做Ghost的话我不会考虑用Norton第二次...
这是我刚装的NIS2007，资源占用很令人惊讶吧