麦咖啡McAfee VirusScan Enterprise 8.5i Patch3下载VSE8.5的Patch3补丁已经出来有两个星期了，从下面引用的信息可以看出来，不过这个在国内并不是很多人知道，不过在McAfee的官方论坛上早就发了，而且帖子置顶，不过大家比较争议的是还有几个bug没有完善好，除了我们打上Patch3补丁修复27个已知解决的Bug外，那么我们只有期待Patch4的到来。
下载后解包，双击setup.exe文件即可安装，升级的时候最好关闭你的一切网络活动，因为升级的时候McAfee会被禁用关闭掉。
下载页面： http://www.mcafeefans.com/article.asp?id=1713
对PATCH3官方帮助文档的翻译：http://www.mcafeefans.com/article.asp?id=1714
敬请继续关注麦粉丝中文网
为了方便懒人懒得转跳过去看帮助翻译文档!特地转过来!
今天看到mcafee的官方资料库上已经发布了VirusScan Enterprise 8.5i Patch 3 的说明文件，我们论坛的空空同志已经第一时间发布了这个补丁程序，大家可以到下载板块去下载。众所周知的，patch2并没有公开发布，mcafee是跳过了patch2而直接发布patch3的，所以patch2中解决的问题肯定就已经包含在最新的patch3中了。其中patch2解决了19个bug，而patch3则解决了8个bug，先知道你的问题在这次的更新中有没有得到解决？那就跟着小柯我一起来看一看吧。
PS:由于说明文档较长，所以只针对PATCH2以及PATCH3所解决的问题进行翻译，翻译水平有限，请原谅。
本问由麦粉丝中文网火鸟团队成员柯文瞬翻译，转载请注明出处: 麦粉丝中文网 及 论坛
 引用内容
patch2
1. ISSUE:
When an AutoUpdate task copies new DAT files
into the engine folder, VirusScan services and
Microsoft Outlook can spike CPU utilization in
excess of one minute.
当AutoUpdate自动更新任务复制新的病毒库文件到杀毒引擎文件夹时，VirusScan服务以及Microsoft Outlook可能会导致CPU占用率骤升。
2. ISSUE:
The Quarantine path cannot be changed for the
On-Access Scanner via ePolicy orchestrator or
Protection Pilot. A registry value was not being
updated correctly.
病毒隔离库路径不能通过ePO或者Protection Pilot进行修改。其中一个注册表键值不能被正确地更新。
3. ISSUE:
When creating a user-defined detection in the
Unwanted Program policy, the rule does not take
affect immediately. To enable the rule, the
McShield service must be stopped and restarted.
当用户在“有害程序策略”中添加自定义的检测项目时，策略并不会马上生效。只有暂停并重启McShield服务时才会生效。
4. ISSUE:
VirusScan’s ability to scan "floppy during
shutdown" prevents proper shutdown of a system
with a clean floppy in its drive.
当软驱中存在空白的软盘时，VirusScan的“在关机过程中扫描软盘”功能可能导致用户无法正常关机
5. ISSUE:
A crash was reported by customers and in
Microsoft’s Online Crash Analysis (OCA), during
system start-up.
系统启动过程中可能出现的死机现象。
6. ISSUE:
VirusScan does not correctly remove Buffer
Overflow Protection process exclusions that are
introduced by ePolicy orchestrator or Protection
Pilot.
VirusScan不能通过ePo以及ProtectionPilot正常移除“缓冲区溢出保护”的进程例外
7. ISSUE:
When a detection occurs on an EMC network share
(CAVA/Celera) and the file has the read-only
attribute, the delete action fails.
当检测存在EMC的网络共享时，可能无法删除标记为只读的文件
8. ISSUE:
Detections on a network share may leave behind
zero byte files on the share.
在网络共享中进行检测时可能留下0字节的文件在共享中
9. ISSUE:
The On-Access Scanner functions in Console are
not updating properly when Access Protection is
disabled.
当访问保护功能关闭时，可能导致控制台中的按访问扫描功能无法正常更新
10. ISSUE:
The Self Protection feature of Access Protection
is disabled after removing a Patch from the
system.
访问保护中的“禁止McAfee服务被停止”功能会在移除一个补丁后关闭
11. ISSUE:
Interacting with Remote Console On-Demand Scan
and AutoUpdate tasks caused the local tasks with
the same id to be acted upon, instead of the
remote task.
远程控制台中的按需扫描以及自动更新任务会与本地任务冲突（此处不确定）
12. ISSUE:
When you upgrade from VirusScan Enterprise 7.1
or 8.0i to version 8.5i and choose to preserve
settings, previously created console tasks do
not display in the VirusScan console.
当你从VirusScan Enterprise 7.1或者8.0i版本更新至8.5i时所选择保留的设置，以及任务并未显示在8.5i的控制台中。
13. ISSUE:
With the McAfee Installation Designer (MID)
option to "Allow Users to Uninstall" disabled,
the UninstallString registry value was removed
to prevent product removal. This registry value
was also used by ePolicy orchestrator to
determine that VirusScan was installed.
当McAfee Installation Designer 中设置了关闭“允许用户卸载”的功能时，卸载的注册表信息将被删除以保护产品不被卸载。同理，通过ePO安装VirusScan 亦然。
14. ISSUE:
Some threats were not being detected in the
Quarantine Manager by the rescan functionality.
有些威胁不会被病毒隔离管理器重新扫描。
15. ISSUE:
If McShield and McTaskManager Services were
stopped and restarted in a specific order, the
Access Protection and Buffer Overflow features
remained disabled after the services started.
如果McShield 以及 McTaskManager服务被暂停并重启时，访问保护以及缓冲区溢出保护功能在前面那些服务重启后依然是关闭的。
16. ISSUE:
McShield service may crash when a configuration
change occurs during scanning.
在扫描过程中，当设置被更改后可能导致McShield服务出现错误
17. ISSUE:
Setting a user interface password for Access
Protection did not prevent the ability for the
user to right-click and disable that feature.
The option to disable right-click ability is
under the "Other" category (Console and
Miscellaneous).
在用户界面为访问保护设置密码并不能阻止用户是由右键点击关闭该功能。关闭右键点击的功能在“其他”的目录下。
18. ISSUE:
The Buffer Overflow Protection displays a
detection in the On-Access Messages window when
the "Show the messages when a buffer overflow is
detected" option is disabled.
“当缓冲区溢出保护检测到威胁时弹出信息窗口”选项关闭时，缓冲区溢出保护依然会在按访问保护信息窗体中显示。
19. ISSUE:
On-Access Scanner’s Network Drive Scanning
causes network copy times to increase, more then
what is normally expected, when this option is
enabled.
当按访问扫描中设置对“网络驱动器”进行扫描时，会导致网络中复制文件的速度降低。
引用内容
patch3:
1. ISSUE:
A D1 bugcheck (blue screen) can occur with
VirusScan Enterprise 8.5i when installed on
heavily loaded servers.
当服务器高负荷运作时可能会导致出现蓝屏
2. ISSUE:
A D1 bugcheck (blue screen) can occur with
VirusScan Enterprise 8.5i when installed on a
Microsoft Exchange server.
安装了Microsoft Exchange server的计算机可能导致出现蓝屏
RESOLUTION:
The Access Protection driver has been updated to
resolve the issue.
更新了按访问保护的驱动程序
3. ISSUE:
An 8E bugcheck (blue screen) was reported by
customers and in Microsoft’s Online Crash
Analysis (OCA), showing a crash in an
instruction that could not ordinarily fail.
联机崩溃分析(OCA)中反馈的可能导致的死机问题
RESOLUTION:
The Link Driver was revised to bring it into
compliance with guidelines specified in Intel’s
Core2 Errata AI33, to prevent such unusual
behavior on affected processors.
这种情况貌似只在双核的英特尔处理器中出现（Errata AI33这个我不懂，大概是型号吧）
4. ISSUE:
A 7E bugcheck (blue screen) can occur with
certain low resource conditions.
系统资源不足的情况下可能导致出错。
5. ISSUE:
On 64-bit systems, VirusScan Statistics causes
an issue where the user cannot open more then
one Microsoft Virtual PC image. Virtual PC
reports insufficient memory.
在64位系统中可能导致用户无法打开多于一个的虚拟机镜像。
6. ISSUE:
When integrated with the Checkpoint SecureClient
software, VirusScan Enterprise uses incorrect
registry values for DAT and Engine version
information.
VSE错误显示DAT病毒库文件以及杀毒引擎版本的信息的现象
7. ISSUE:
With Access Protections rules set to Maximum
Security, during the installation, VirusScan
Enterprise Checkpoint integration fails to query
the On-Access Scanner service state.
安装过程中，假如对按访问扫描保护设置最大保护，将可能导致无法启动按访问扫描服务（我不知道checkpoint在这里应当如何理解）
8. ISSUE:
Custom VirusScan Enterprise 8.5i policies are
lost after upgrading from ePolicy orchestrator
3.5 to 3.6.x.
当ePO从3.5升级至3.6.x版本时，vse 8.5i的自定义规则就会丢失。请严格遵循安装步骤。
据我从官方论坛中了解到，patch3目前还存在一些问题，比如：
引用内容
VSE 8.5 Patch 3 NAP knackers access protection rules shown in EPO.
Some of the Access Protection rules are not displayed in the ePolicy orchestrator (ePO) 3.6.1 console when selecting the VirusScan Enterprise (VSE) 8.5i Access Protection Policies.
The missing rules disappear after checking in the VSE850.NAP file that is packaged with:
- VirusScan Enterprise 8.5i Patch 3
- VirusScan HotFix VSE85HF348674.zip
https://knowledge.mcafee.com/SupportSite/search.do?cmd=displayKC&docType=kc&externalId=613817&sliceId=SAL_Public&dialogID=12506782&stateId=1%200%2012504661
https://knowledge.mcafee.com/Support...200%2012504661
The fix is to recheckin the old NAP version: VSE 8.5.0.662
Edit:
NOTE. As of the time of this post VSE 8.5 SP3 is still NOT available on the corporate downloads site.
大概意思是当在ePO 3.6.1控制台中选中VirusScan Enterprise (VSE) 8.5i 的访问保护策略时，某些访问保护规则并不会显示。
本问由麦粉丝中文网火鸟团队成员柯文瞬翻译，转载请注明出处: 麦粉丝中文网 及 论坛
VSE8.5 Patch3 本站下载页面：http://www.mcafeefans.com/article.asp?id=1713
[ 本帖最后由 小邪邪 于 2007-9-25 16:13 编辑 ] |
发表于 2007-9-25 16:08:14
发表于 2007-9-25 17:38:20
这个补丁集成Patch1&2么？
这么快就被转过来了
一共解决了这么多bug 不知道各位打了补丁重启后 以前比较卡的还卡不？
谢谢了~~~那官方安装程序会集成最新的补丁包么？
