请问这是什么问题要怎么解决

20040815

精英965PLT主板因点不亮返厂维修,取回装好后开机进XP跑马条后跑得N慢,第一条没跑完,就出现蓝底上面有字,不能使用,进不了.请问是什么问题要怎么解决,出现的字如下:

A proble has been cletected and uindows has been shut down to preevent damage to your computer
If
this is the first time you've seen this stop error screen, restart your computer.If this scveen again,
follow these steps;
The BIOS in this system is not fully ACPI compliant,
please contact your system Vender or visit
http://www.hardware-update.com
foran updated BIOS.If you are unable to obtain an updated BIOS or the latest BIOS supplied
by your vendor is not ACPI compliant,you can turn off ACPI made during text mode setup. To dothis,simply press the F7
key when you are prompted to install storage drivers.
The system will not notify you that the F7 key was pressed-it will silently disable APIC and allow you to continue your installation.
Technical information;
stop:0*000000A5（0*00000011，0*00000006，0*00000000，0*00000000）

升到了最新版的BIOS,还是一样,换块主板就好了,确定是主板硬件问题,谢了

[ 本帖最后由 20040815 于 2008-1-11 11:40 编辑 ]

提示好像是说bios不支持ACPI电源模式。
也许升级bios能解决。

把主板的电池扣下来放电，再装上试试能正常吗？不行的话还是联系经销商吧。

[ 本帖最后由 卡巴007 于 2008-1-8 19:43 编辑 ]

remind_me

复制来的，希望对你有所帮助。建议还是升级bios吧

0×000000A5：ACPI_BIOS_ERROR
错误分析：通常是因为主板BIOS不能全面支持ACPI规范。
解 决方案：如果没有相应BIOS升级，那么可在安装Windows2000/XP时，当出现 “ Press F6 if you need to install a third-party SCSI or RAID driver”提示时， 按下 F7键，这样Windows便会自动禁止安装 ACPI HAL，而安装 Standard PC HAL。