查看: 6064|回复: 27
收起左侧

[求助] 关于eMule设置问题

[复制链接]
gamesrui
发表于 2008-1-17 08:57:17 | 显示全部楼层 |阅读模式
大家好.我是家庭通过ADSL拨号上网的单用户,我想问一下关EMULE中的HIGH ID的相关设置.
我参照了那六个Rule 也就是
1. Go to : Firewall -> Advanced -> Attack Detection Settings -> Miscellanous —> disable  Do Protocol analysis
2. Go to : Firewall -> Advanced -> Predifined Firewall Policies  
    然后选择 Add...
    Give a name at the new  Predifined Policy  for example: Emule
    自己添加一个预定义规则的新名字 如:  Emule
Add the following rules:
添加如下规则
Rule 1
Action = Allow
Protocol = TCP
Direction = In
Description = Rule for incoming TCP connections
Source Address = Any
Destination Address = Any
Source port = A port range = (start port = 1025 / end port = 65535)
Destination port = your TCP port of emule   填入你的电驴 TCP 端口号

Rule 2
Action = Allow
Protocol = UDP
Direction = In
Description = Rule for incoming UDP connections
Source Address = Any
Destination Address = Any
Source port = A port range = (start port = 1025 / end port = 65535)
Destination port = your UDP port of emule   填入你的电驴 UDP端口号

Rule 3
Action = Allow
Protocol = TCP
Direction = Out
Description = Rule for outgoing TCP connections
Source Address = Any
Destination Address = Any
Source port = A port range = (start port = 1025 / end port = 65535)
Destination port = A port range = (start port = 1025 / end port = 65535)

Rule 4
Action = Allow
Protocol = UDP
Direction = Out
Description = Rule for outgoing UDP connections
Source Address = Any
Destination Address = Any
Source port = your UDP port of emule    填入你的电驴的 UDP 端口号
Destination port = A port range = (start port = 1025 / end port = 65535)

Rule 5
Action = Ask (enable Log as a firewall event if this rule is fired) 在Log as ……此项前打勾
Protocol = TCP
Direction = Out
Description = Rule for HTTP requests
Source Address = Any
Destination Address = Any
Source port = A port range = (start port = 1025 / end port = 65535)
Destination port = 80

Rule 6
Action = Block (enable Log as a firewall event if this rule is fired) 同上
Protocol = IP
Direction = In/OUT
Description = Block and Log All Unmatching Requests
Source Address = Any
Destination Address = Any
IP Details = Any
下面是我的一些图.大家麻烦帮我看下到底哪里设置错了导致不能高ID呢?

上面说的TCP和UDP的端口我也同样就设置成了7554和7564这里会不会有什么问题呢??


本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?快速注册

x
gamesrui
 楼主| 发表于 2008-1-17 09:00:13 | 显示全部楼层
哦说一下.如果我不限制那下载和上传时候也能上到200几K左右.我想速度不是问题.但我不喜欢LOW ID.
gamesrui
 楼主| 发表于 2008-1-17 09:06:46 | 显示全部楼层
刚才细看下日志.也没有发现不正常的网络规则.所以真有些郁闷不知道哪里少了设置或是哪里错了.

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?快速注册

x
gamesrui
 楼主| 发表于 2008-1-17 11:57:27 | 显示全部楼层
天啊.怎么没有人回我呀.我急哦.
santoque
发表于 2008-1-17 12:08:39 | 显示全部楼层
我把emule加入了信任程序里面,然后就是high id。

[ 本帖最后由 santoque 于 2008-1-17 12:09 编辑 ]
gamesrui
 楼主| 发表于 2008-1-17 12:10:16 | 显示全部楼层
那你这样就HIGH ID吗?还有这样不好吧.这样感觉有些危险.
santoque
发表于 2008-1-17 12:22:37 | 显示全部楼层
stealth wizard的那个选项最好选第二个p2p的。从来没听说有利用emule干坏事的。

家庭用户又不在五角大楼,这样的配置觉得危险就属于心理问题了。

[ 本帖最后由 santoque 于 2008-1-17 12:26 编辑 ]
gamesrui
 楼主| 发表于 2008-1-17 12:35:13 | 显示全部楼层
我安装的时候不是P2P.但最后在那个stealth ports wizard 里选了第二个了.感觉应该一样吧?
santoque
发表于 2008-1-17 13:18:33 | 显示全部楼层
一样的。不会有安全问题。
hlye
发表于 2008-1-17 14:04:41 | 显示全部楼层
喔,这样就行了啊
您需要登录后才可以回帖 登录 | 快速注册

本版积分规则

手机版|杀毒软件|软件论坛| 卡饭论坛

Copyright © KaFan  KaFan.cn All Rights Reserved.

Powered by Discuz! X3.4( 沪ICP备2020031077号-2 ) GMT+8, 2025-5-1 14:35 , Processed in 0.139381 second(s), 19 queries .

卡饭网所发布的一切软件、样本、工具、文章等仅限用于学习和研究,不得将上述内容用于商业或者其他非法用途,否则产生的一切后果自负,本站信息来自网络,版权争议问题与本站无关,您必须在下载后的24小时之内从您的电脑中彻底删除上述信息,如有问题请通过邮件与我们联系。

快速回复 客服 返回顶部 返回列表