发现比特精灵有两个监听端口

iceboybatman

用比特精灵下东西，查看网络连接，竟然发现有2个监听端口，

[localimg=700,121]1[/localimg]
我的概念里一直认为比特精灵只有一个端口的，这多出的端口是怎么回事?软件设置的监听端口是18658，我在网络规则里开放了这个端口了，而且
我的防火墙发现比特精灵阻挡了很多出去的UDP




我想是不是因为我只开放了一个监听端口的原因？（我用的比特精灵的网络设定规则直接套用的U版主的“打磨comodo”里的BT规则.在全局规则里我开放了18658端口，允许外界的数据进入到这个端口）

VENSTER

用bt只进不出，鄙视你

hanq

楼主逼得楼上的发了第一帖

svwghq

原帖由 <i>iceboybatman</i> 于 2008-3-15 01:54 发表 <a href="http://bbs.kafan.cn/redirect.php?goto=findpost&pid=3010899&ptid=218296" target="_blank"><img src="http://bbs.kafan.cn/images/common/back.gif" border="0" onclick="zoom(this)" onload="attachimg(this, 'load')" alt="" /></a><br />
用比特精灵下东西，查看网络连接，竟然发现有2个监听端口，<br />
219806<br />
[localimg=700,121]1[/localimg]<br />
我的概念里一直认为比特精灵只有一个端口的，这多出的端口是怎么回事?软件设置的监听端口是18658，我在网络规则 ...

<br />
1900的那个是UPnP设备的端口，你可以在比特精灵中关闭，也可以直接关闭相应的服务，如果你的网络上没UPnP设备的话

伯夷叔齐

这个问题值得讨论一下，因为迅雷也是两个监听端口，可以从连接状态表中显示来观察。

1、究竟为什么它们都有两个监听端口，两个端口之间有什么区别；
2、U版打磨一篇中的迅雷和BT设置里，所说到的监听端口究竟是指哪个端口，是否两个监听端口要先设成组，再一起加入到软件的网络规则,还是只选那个可以手动设置的；

3、一个有间接关联的题外话，就是U版打磨一篇里的UDP连出设置里，从本机的监听端口连出到任意DYNAMIC PORTS，但程序和端口的连接状态表里显示的两个监听端口都是TCP呀，难道UDP那个监听端口没有从表中显示出来？或者就是那个迅雷里可以手动修改的UDP端口？或者TCP的监听端口也可以监听UDP协议的通讯？！

最后说一下，也许是我对U版设置不太明晰，也许U版的设置有一点错误，希望高手给一个明确答案。最后说一点，感觉用U版的迅雷规则，迅雷在下载很多资源时，明显比COMODO自动创建的规则条件下下载速度要慢。

U版的BT网络规则如下：

Allow Incoming TCP and UDP Requests
[Allow TCP OR UDP In From IP Any To IP Any Where Source Port Is In [Dynamic Ports 1025-65535] And Destination Port Is In [BT 监听端口]]
Allow Outgoing TCP Requests
[Allow TCP Out From IP Any To IP Any Where Source Port Is In [Dynamic Ports 1025-65535] And Destination Port Is In [Dynamic Ports 1025-65535]]
Allow Outgoing UDP Requests
[Allow UDP Out From IP Any To IP Any Where Source Port Is In [BT 监听端口] And Destination Port Is In [Dynamic Ports 1025-65535]]
Allow Outgoing HTTP Requests
[Allow TCP Out From IP Any To IP Any Where Source Port Is In [Dynamic Ports 1025-5000] And Destination Port Is 80-83]
Allow Outgoing Ping Requests
[Allow ICMP Out From IP Any to IP Any Where ICMP Message Is ECHO REQUEST]
Allow Outgoing DNS Requests
[Allow UDP Out From IP Any To In [OpenDNS] Where Source Port Is In [Dynamic Ports 1025-5000] And Destination Port Is 53]
Allow Access to Loopback Zone
[Allow IP Out From IP Any To In [Loopback Zone] Where Protocol Is Any]
Block and Log All Unmatching Requests


U版的迅雷网络规则如下：

Allow Incoming TCP and UDP Requests
[Allow TCP OR UDP In From IP Any To IP Any Where Source Port Is In [Dynamic Ports 1025-65535] And Destination Port Is In [迅雷 监听端口]]
Allow Outgoing TCP Requests
[Allow TCP Out From IP Any To IP Any Where Source Port Is In [Dynamic Ports 1025-65535] And Destination Port Is In [Dynamic Ports 1025-65535]]
Allow Outgoing UDP Requests
[Allow UDP Out From IP Any To IP Any Where Source Port Is In [迅雷 监听端口] And Destination Port Is In [Dynamic Ports 1025-65535]]
Allow Outgoing Thunder Ports Requests
[Allow TCP OR UDP Out From IP Any To IP Any Where Source Port Is In [Dynamic Ports 1025-65535 And Destination Port Is In [Thunder Ports]]
Allow Outgoing HTTP Requests
[Allow TCP Out From IP Any To IP Any Where Source Port Is In [Dynamic Ports 1025-5000] And Destination Port Is 80-83]
Allow Outgoing Ping Requests
[Allow ICMP Out From IP Any to IP Any Where ICMP Message Is ECHO REQUEST]
Allow Outgoing DNS Requests
[Allow UDP Out From IP Any To In [OpenDNS] Where Source Port Is In [Dynamic Ports 1025-5000] And Destination Port Is 53]
Allow Access to Loopback Zone
[Allow IP Out From IP Any To In [Loopback Zone] Where Protocol Is Any]
Block and Log All Unmatching Requests