楼主: cnseatech
收起左侧

[技巧] 一条命令激活Internet Download Manager

  [复制链接]
huqiu2
发表于 2023-10-23 16:47:25 | 显示全部楼层
power shell执行:
irm https://massgrave.dev/ias | iex
后,看看 C:\Windows\Temp 下面的  IAS*.cmd 文件就有源码了

评分

参与人数 1人气 +1 收起 理由
cnseatech + 1 感谢支持,欢迎常来: )

查看全部评分

jecy93
发表于 2023-10-24 11:22:31 | 显示全部楼层
可以可以。尝试看看
nmyh
发表于 2023-10-24 12:30:10 | 显示全部楼层
浏览器打开“https://massgrave.dev/ias.ps1”,然后有个地址就是:
  1. https://raw.githubusercontent.com/WindowsAddict/IDM-Activation-Script/main/IAS.cmd
复制代码

然而这个地址国内网络无法访问,需要想点办法
yinghua41
发表于 2023-10-24 13:27:17 | 显示全部楼层
nmyh 发表于 2023-10-24 12:30
浏览器打开“https://massgrave.dev/ias.ps1”,然后有个地址就是:

然而这个地址国内网络无法访问,需 ...

內容
@setlocal DisableDelayedExpansion
@echo off



::============================================================================
::
::   IDM Activation Script (IAS)
::
::   Homepages: https://github.com/WindowsAddict/IDM-Activation-Script
::              https://massgrave.dev/idm-activation-script
::
::       Email: windowsaddict@protonmail.com
::
::============================================================================




:: Add custom name in IDM license info, prefer to write it in English and/or numeric in below line after = sign,
set name=

: Parameters_info

:: For activation in unattended mode, run the script with /act parameter.
:: For reset in unattended mode, run the script with /res parameter.
:: To enable silent mode with above two methods, run the script with /s parameter.

::========================================================================================================================================

:: Re-launch the script with x64 process if it was initiated by x86 process on x64 bit Windows
:: or with ARM64 process if it was initiated by x86/ARM32 process on ARM64 Windows

set "_cmdf=%~f0"
for %%# in (%*) do (
if /i "%%#"=="r1" set r1=1
if /i "%%#"=="r2" set r2=1
)

if exist %SystemRoot%\Sysnative\cmd.exe if not defined r1 (
setlocal EnableDelayedExpansion
start %SystemRoot%\Sysnative\cmd.exe /c ""!_cmdf!" %* r1"
exit /b
)

:: Re-launch the script with ARM32 process if it was initiated by x64 process on ARM64 Windows

if exist %SystemRoot%\SysArm32\cmd.exe if %PROCESSOR_ARCHITECTURE%==AMD64 if not defined r2 (
setlocal EnableDelayedExpansion
start %SystemRoot%\SysArm32\cmd.exe /c ""!_cmdf!" %* r2"
exit /b
)

::  Set Path variable, it helps if it is misconfigured in the system

set "PATH=%SystemRoot%\System32;%SystemRoot%\System32\wbem;%SystemRoot%\System32\WindowsPowerShell\v1.0\"
if exist "%SystemRoot%\Sysnative\reg.exe" (
set "PATH=%SystemRoot%\Sysnative;%SystemRoot%\Sysnative\wbem;%SystemRoot%\Sysnative\WindowsPowerShell\v1.0\;%PATH%"
)

::  Check LF line ending

pushd "%~dp0"
>nul findstr /rxc:".*" "%~nx0"
if not %errorlevel%==0 (
echo:
echo Error: Script either has LF line ending issue, or it failed to read itself.
echo:
ping 127.0.0.1 -n 6 > nul
popd
exit /b
)
popd

::========================================================================================================================================

cls
color 07

set _args=
set _elev=
set reset=
set Silent=
set activate=

set _args=%*
if defined _args set _args=%_args:"=%
if defined _args (
for %%A in (%_args%) do (
if /i "%%A"=="-el"  set _elev=1
if /i "%%A"=="/res" set Unattended=1&set activate=&set reset=1
if /i "%%A"=="/act" set Unattended=1&set activate=1&set reset=
if /i "%%A"=="/s"   set Unattended=1&set Silent=1
)
)

::========================================================================================================================================

set winbuild=1
set "nul=>nul 2>&1"
set "_psc=%SystemRoot%\System32\WindowsPowerShell\v1.0\powershell.exe"
for /f "tokens=6 delims=[]. " %%G in ('ver') do set winbuild=%%G

set _NCS=1
if %winbuild% LSS 10586 set _NCS=0
if %winbuild% GEQ 10586 reg query "HKCU\Console" /v ForceV2 2>nul | find /i "0x0" 1>nul && (set _NCS=0)

call :_colorprep
set "nceline=echo: &echo ==== ERROR ==== &echo:"
set "line=________________________________________________________________________________________"
set "_buf={$W=$Host.UI.RawUI.WindowSize;$B=$Host.UI.RawUI.BufferSize;$W.Height=31;$B.Height=300;$Host.UI.RawUI.WindowSize=$W;$Host.UI.RawUI.BufferSize=$B;}"

if defined Silent if not defined activate if not defined reset exit /b
if defined Silent call :begin %nul% & exit /b

:begin

::========================================================================================================================================

if not exist "%_psc%" (
%nceline%
echo Powershell is not installed in the system.
echo Aborting...
goto done2
)

if %winbuild% LSS 7600 (
%nceline%
echo Unsupported OS version Detected.
echo Project is supported only for Windows 7/8/8.1/10/11 and their Server equivalent.
goto done2
)

::========================================================================================================================================

::  Fix for the special characters limitation in path name
::  Thanks to @abbodi1406

set "_work=%~dp0"
if "%_work:~-1%"=="\" set "_work=%_work:~0,-1%"

set "_batf=%~f0"
set "_batp=%_batf:'=''%"

set _PSarg="""%~f0""" -el %_args%

set "_appdata=%appdata%"
for /f "tokens=2*" %%a in ('reg query "HKCU\Software\DownloadManager" /v ExePath 2^>nul') do call set "IDMan=%%b"

setlocal EnableDelayedExpansion

::========================================================================================================================================

::  Elevate script as admin and pass arguments and preventing loop

>nul fltmc || (
if not defined _elev %_psc% "start cmd.exe -arg '/c \"!_PSarg:'=''!\"' -verb runas" && exit /b
%nceline%
echo This script require administrator privileges.
echo To do so, right click on this script and select 'Run as administrator'.
goto done2
)

::========================================================================================================================================

:: Below code also works for ARM64 Windows 10 (including x64 bit emulation)

reg query "HKLM\Hardware\Description\System\CentralProcessor\0" /v "Identifier" | find /i "x86" 1>nul && set arch=x86|| set arch=x64

if not exist "!IDMan!" (
if %arch%==x64 set "IDMan=%ProgramFiles(x86)%\Internet Download Manager\IDMan.exe"
if %arch%==x86 set "IDMan=%ProgramFiles%\Internet Download Manager\IDMan.exe"
)

if "%arch%"=="x86" (
set "CLSID=HKCU\Software\Classes\CLSID"
set "HKLM=HKLM\Software\Internet Download Manager"
set "_tok=5"
) else (
set "CLSID=HKCU\Software\Classes\Wow6432Node\CLSID"
set "HKLM=HKLM\SOFTWARE\Wow6432Node\Internet Download Manager"
set "_tok=6"
)

set _temp=%SystemRoot%\Temp
set regdata=%SystemRoot%\Temp\regdata.txt
set "idmcheck=tasklist /fi "imagename eq idman.exe" | findstr /i "idman.exe" >nul"

::========================================================================================================================================

if defined Unattended (
if defined reset goto _reset
if defined activate goto _activate
)

:MainMenu

cls
title  IDM Activation Script 0.8
mode 75, 30

:: Check firewall status

set /a _ena=0
set /a _dis=0
for %%# in (DomainProfile PublicProfile StandardProfile) do (
for /f "skip=2 tokens=2*" %%a in ('reg query HKLM\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\%%# /v EnableFirewall 2^>nul') do (
if /i %%b equ 0x1 (set /a _ena+=1) else (set /a _dis+=1)
)
)

if %_ena%==3 (
set _status=Enabled
set _col=%_Green%
)

if %_dis%==3 (
set _status=Disabled
set _col=%_Red%
)

if not %_ena%==3 if not %_dis%==3 (
set _status=Status_Unclear
set _col=%_Yellow%
)

echo:
echo:
echo:
echo:
echo:
echo:
echo:            ___________________________________________________
echo:                                                               
echo:               [1] Activate IDM                                
echo:               [2] Reset IDM Activation / Trial in Registry
echo:               _____________________________________________   
echo:                                                               
call :_color2 %_White% "               [3] Toggle Windows Firewall  " %_col% "[%_status%]"
echo:               _____________________________________________   
echo:                                                               
echo:               [4] ReadMe                                      
echo:               [5] Exit                                       
echo:            ___________________________________________________
echo:         
call :_color2 %_White% "             " %_Green% "Enter a menu option in the Keyboard [1,2,3,4,5]"
choice /C:12345 /N
set _erl=%errorlevel%

if %_erl%==5 exit /b
if %_erl%==4 start https://github.com/WindowsAddict/IDM-Activation-Script & start https://massgrave.dev/idm-activation-script & goto MainMenu
if %_erl%==3 call :_tog_Firewall&goto MainMenu
if %_erl%==2 goto _reset
if %_erl%==1 goto _activate
goto :MainMenu

::========================================================================================================================================

:_tog_Firewall

if %_status%==Enabled (
netsh AdvFirewall Set AllProfiles State Off >nul
) else (
netsh AdvFirewall Set AllProfiles State On >nul
)
exit /b

::========================================================================================================================================

:_reset

if not defined Unattended (
mode 93, 32
%nul% %_psc% "&%_buf%"
)

echo:
set _error=

reg query "HKCU\Software\DownloadManager" "/v" "Serial" %nul% && (
%idmcheck% && taskkill /f /im idman.exe
)

if exist "!_appdata!\DMCache\settings.bak" del /s /f /q "!_appdata!\DMCache\settings.bak"

set "_action=call :delete_key"
call :reset

echo:
echo %line%
echo:
if not defined _error (
call :_color %Green% "IDM Activation - Trial is successfully reset in the registry."
) else (
call :_color %Red% "Failed to completely reset IDM Activation - Trial."
)

goto done

::========================================================================================================================================

:_activate

if not defined Unattended (
mode 93, 32
%nul% %_psc% "&%_buf%"
)

echo:
set _error=

if not exist "!IDMan!" (
call :_color %Red% "IDM [Internet Download Manager] is not Installed."
echo You can download it from  https://www.internetdownloadmanager.com/download.html
goto done
)

:: Internet check with internetdownloadmanager.com ping and port 80 test

ping -n 1 internetdownloadmanager.com >nul || (
%_psc% "$t = New-Object Net.Sockets.TcpClient;try{$t.Connect("""internetdownloadmanager.com""", 80)}catch{};$t.Connected" | findstr /i true 1>nul
)

if not [%errorlevel%]==[0] (
call :_color %Red% "Unable to connect internetdownloadmanager.com, aborting..."
goto done
)

echo Internet is connected.

%idmcheck% && taskkill /f /im idman.exe

if exist "!_appdata!\DMCache\settings.bak" del /s /f /q "!_appdata!\DMCache\settings.bak"

set "_action=call :delete_key"
call :reset

set "_action=call :count_key"
call :register_IDM

echo:
if defined _derror call :f_reset & goto done

set lockedkeys=
set "_action=call :lock_key"
echo Locking registry keys...
echo:
call :action

if not defined _error if [%lockedkeys%] GEQ [7] (
echo:
echo %line%
echo:
call :_color %Green% "IDM is successfully activated."
echo:
call :_color %Gray% "If fake serial screen appears, run activation again, after that it wont appear."
goto done
)

call :f_reset

::========================================================================================================================================

:done

echo %line%
echo:
echo:
if defined Unattended (
timeout /t 3
exit /b
)

call :_color %_Yellow% "Press any key to return..."
pause >nul
goto MainMenu

:done2

if defined Unattended (
timeout /t 3
exit /b
)

echo Press any key to exit...
pause >nul
exit /b

::========================================================================================================================================

:f_reset

echo:
echo %line%
echo:
call :_color %Red% "Error found, resetting IDM activation..."
set "_action=call :delete_key"
call :reset
echo:
echo %line%
echo:
call :_color %Red% "Failed to activate IDM."
exit /b

::========================================================================================================================================

:reset

set take_permission=
call :delete_queue
set take_permission=1
call :action
call :add_key
exit /b

::========================================================================================================================================

:_rcont

reg add %reg% %nul%
call :_add_key
exit /b

:register_IDM

echo:
echo Applying registration details...
echo:

If not defined name set name=Tonec FZE

set "reg=HKCU\SOFTWARE\DownloadManager /v FName /t REG_SZ /d "%name%"" & call :_rcont
set "reg=HKCU\SOFTWARE\DownloadManager /v LName /t REG_SZ /d """ & call :_rcont
set "reg=HKCU\SOFTWARE\DownloadManager /v Email /t REG_SZ /d "info@tonec.com"" & call :_rcont
set "reg=HKCU\SOFTWARE\DownloadManager /v Serial /t REG_SZ /d "FOX6H-3KWH4-7TSIN-Q4US7"" & call :_rcont

echo:
echo Triggering a few downloads to create certain registry keys, please wait...

set "file=%_temp%\temp.png"
set _fileexist=
set _derror=

%idmcheck% && taskkill /f /im idman.exe

set link=https://www.internetdownloadmanager.com/images/idm_box_min.png
call :download
set link=https://www.internetdownloadmanager.com/register/IDMlib/images/idman_logos.png
call :download

:: it may take some time to reflect registry keys.
timeout /t 3 >nul

set foundkeys=
call :action
if [%foundkeys%] GEQ [7] goto _skip

set link=https://www.internetdownloadmanager.com/pictures/idm_about.png
call :download
set link=https://www.internetdownloadmanager.com/languages/indian.png
call :download

timeout /t 3 >nul

set foundkeys=
call :action
if not [%foundkeys%] GEQ [7] set _derror=1

:_skip

echo:
if not defined _derror (
echo Required registry keys were created successfully.
) else (
if not defined _fileexist call :_color %Red% "Unable to download files with IDM."
call :_color %Red% "Failed to create required registry keys."
call :_color %Magenta% "Try again - disable Windows firewall with script options - check Read Me."
)

echo:
%idmcheck% && taskkill /f /im idman.exe
if exist "%file%" del /f /q "%file%"
exit /b

:download

set /a attempt=0
if exist "%file%" del /f /q "%file%"
start "" /B "!IDMan!" /n /d "%link%" /p "%_temp%" /f temp.png

:check_file

timeout /t 1 >nul
set /a attempt+=1
if exist "%file%" set _fileexist=1&exit /b
if %attempt% GEQ 20 exit /b
goto :Check_file

::========================================================================================================================================

:delete_queue

echo:
echo Deleting registry keys...
echo:

for %%# in (
""HKCU\Software\DownloadManager" "/v" "FName""
""HKCU\Software\DownloadManager" "/v" "LName""
""HKCU\Software\DownloadManager" "/v" "Email""
""HKCU\Software\DownloadManager" "/v" "Serial""
""HKCU\Software\DownloadManager" "/v" "scansk""
""HKCU\Software\DownloadManager" "/v" "tvfrdt""
""HKCU\Software\DownloadManager" "/v" "radxcnt""
""HKCU\Software\DownloadManager" "/v" "LstCheck""
""HKCU\Software\DownloadManager" "/v" "ptrk_scdt""
""HKCU\Software\DownloadManager" "/v" "LastCheckQU""
"%HKLM%"
) do for /f "tokens=* delims=" %%A in ("%%~#") do (
set "reg="%%~A"" &reg query !reg! %nul% && call :delete_key
)

exit /b

::========================================================================================================================================

:add_key

echo:
echo Adding registry key...
echo:

set "reg="%HKLM%" /v "AdvIntDriverEnabled2""

reg add %reg% /t REG_DWORD /d "1" /f %nul%

:_add_key

if [%errorlevel%]==[0] (
set "reg=%reg:"=%"
echo Added - !reg!
) else (
set _error=1
set "reg=%reg:"=%"
%_psc% write-host 'Failed' -fore 'white' -back 'DarkRed'  -NoNewline&echo  - !reg!
)
exit /b

::========================================================================================================================================

:action

set garbagekeys=0

if exist %regdata% del /f /q %regdata% %nul%

reg query %CLSID% > %regdata%

%nul% %_psc% "(gc %regdata%) -replace 'HKEY_CURRENT_USER', 'HKCU' | Out-File -encoding ASCII %regdata%"

for /f %%a in (%regdata%) do (
for /f "tokens=%_tok% delims=\" %%# in ("%%a") do (
echo %%#|findstr /r "{.*-.*-.*-.*-.*}" >nul && (set "reg=%%a" & call :scan_key)
)
)

if exist %regdata% del /f /q %regdata% %nul%

exit /b

::========================================================================================================================================

:scan_key

reg query %reg% 2>nul | findstr /i "LocalServer32 InProcServer32 InProcHandler32" >nul && exit /b

reg query %reg% 2>nul | find /i "H" 1>nul || (
%_action%
exit /b
)

for /f "skip=2 tokens=*" %%a in ('reg query %reg% /ve 2^>nul') do echo %%a|findstr /r /e "[^0-9]" >nul || (
%_action%
exit /b
)

for /f "skip=2 tokens=3" %%a in ('reg query %reg%\Version /ve 2^>nul') do echo %%a|findstr /r "[^0-9]" >nul || (
%_action%
exit /b
)

for /f "skip=2 tokens=1" %%a in ('reg query %reg% 2^>nul') do echo %%a| findstr /i "MData Model scansk Therad" >nul && (
%_action%
exit /b
)

for /f "skip=2 tokens=*" %%a in ('reg query %reg% /ve 2^>nul') do echo %%a| find /i "+" >nul && (
%_action%
exit /b
)

exit/b

::========================================================================================================================================

:delete_key

reg delete %reg% /f %nul%

if not [%errorlevel%]==[0] if defined take_permission (
%nul% call :reg_own "%reg%" preserve S-1-1-0
reg delete %reg% /f %nul%
)

if [%errorlevel%]==[0] (
set "reg=%reg:"=%"
echo Deleted - !reg!
) else (
set "reg=%reg:"=%"
set _error=1
%_psc% write-host 'Failed' -fore 'white' -back 'DarkRed'  -NoNewline & echo  - !reg!
)

if defined take_permission (
set /a garbagekeys+=1
if !garbagekeys! EQU 12 echo --- Do not worry, only empty and leftover registry keys are being deleted.
)

exit /b

::========================================================================================================================================

:lock_key

%nul% call :reg_own "%reg%" "" S-1-1-0 S-1-0-0 Deny "FullControl"

reg delete %reg% /f %nul%

if not [%errorlevel%]==[0] (
set "reg=%reg:"=%"
echo Locked - !reg!
set /a lockedkeys+=1
) else (
set _error=1
set "reg=%reg:"=%"
%_psc% write-host 'Failed' -fore 'white' -back 'DarkRed'  -NoNewline&echo  - !reg!
)

exit /b

::========================================================================================================================================

:count_key

set /a foundkeys+=1
exit /b

::========================================================================================================================================

::  A lean and mean snippet to set registry ownership and permission recursively
::  Written by @AveYo aka @BAU
::  pastebin.com/XTPt0JSC

:reg_own

%_psc% $A='%~1','%~2','%~3','%~4','%~5','%~6';iex(([io.file]::ReadAllText('!_batp!')-split':Own1\:.*')[1])&exit/b:Own1:
$D1=[uri].module.gettype('System.Diagnostics.Process')."GetM`ethods"(42) |where {$_.Name -eq 'SetPrivilege'} #`:no-ev-warn
'SeSecurityPrivilege','SeTakeOwnershipPrivilege','SeBackupPrivilege','SeRestorePrivilege'|foreach {$D1.Invoke($null, @("$_",2))}
$path=$A[0]; $rk=$path-split'\\',2; $HK=gi -lit Registry::$($rk[0]) -fo; $s=$A[1]; $sps=[Security.Principal.SecurityIdentifier]
$u=($A[2],'S-1-5-32-544')[!$A[2]];$o=($A[3],$u)[!$A[3]];$w=$u,$o |% {new-object $sps($_)}; $old=!$A[3];$own=!$old; $y=$s-eq'all'
$rar=new-object Security.AccessControl.RegistryAccessRule( $w[0], ($A[5],'FullControl')[!$A[5]], 1, 0, ($A[4],'Allow')[!$A[4]] )
$x=$s-eq'none';function Own1($k){$t=$HK.OpenSubKey($k,2,'TakeOwnership');if($t){0,4|%{try{$o=$t.GetAccessControl($_)}catch{$old=0}
};if($old){$own=1;$w[1]=$o.GetOwner($sps)};$o.SetOwner($w[0]);$t.SetAccessControl($o); $c=$HK.OpenSubKey($k,2,'ChangePermissions')
$p=$c.GetAccessControl(2);if($y){$p.SetAccessRuleProtection(1,1)};$p.ResetAccessRule($rar);if($x){$p.RemoveAccessRuleAll($rar)}
$c.SetAccessControl($p);if($own){$o.SetOwner($w[1]);$t.SetAccessControl($o)};if($s){$subkeys=$HK.OpenSubKey($k).GetSubKeyNames()
foreach($n in $subkeys){Own1 "$k\$n"}}}};Own1 $rk[1];if($env:VO){get-acl Registry::$path|fl} #:Own1: lean & mean snippet by AveYo

::========================================================================================================================================

:_color

if %_NCS% EQU 1 (
echo %esc%[%~1%~2%esc%[0m
) else (
call :batcol %~1 "%~2"
)
exit /b

:_color2

if %_NCS% EQU 1 (
echo %esc%[%~1%~2%esc%[%~3%~4%esc%[0m
) else (
call :batcol %~1 "%~2" %~3 "%~4"
)
exit /b

::=======================================

:: Colored text with pure batch method
:: Thanks to @dbenham and @jeb
:: https://stackoverflow.com/a/10407642

:: Powershell is not used here because its slow

:batcol

pushd %_coltemp%
if not exist "'" (<nul >"'" set /p "=.")
setlocal
set "s=%~2"
set "t=%~4"
call :_batcol %1 s %3 t
del /f /q "'"
del /f /q "`.txt"
popd
exit /b

:_batcol

setlocal EnableDelayedExpansion
set "s=!%~2!"
set "t=!%~4!"
for /f delims^=^ eol^= %%i in ("!s!") do (
  if "!" equ "" setlocal DisableDelayedExpansion
    >`.txt (echo %%i\..\')
    findstr /a:%~1 /f:`.txt "."
    <nul set /p "=%_BS%%_BS%%_BS%%_BS%%_BS%%_BS%%_BS%"
)
if "%~4"=="" echo(&exit /b
setlocal EnableDelayedExpansion
for /f delims^=^ eol^= %%i in ("!t!") do (
  if "!" equ "" setlocal DisableDelayedExpansion
    >`.txt (echo %%i\..\')
    findstr /a:%~3 /f:`.txt "."
    <nul set /p "=%_BS%%_BS%%_BS%%_BS%%_BS%%_BS%%_BS%"
)
echo(
exit /b

::=======================================

:_colorprep

if %winbuild% GEQ 10586 (
for /F %%a in ('echo prompt $E ^| cmd') do set "esc=%%a"

set     "Red="41;97m""
set    "Gray="100;97m""
set   "Black="30m""
set   "Green="42;97m""
set    "Blue="44;97m""
set  "Yellow="43;97m""
set "Magenta="45;97m""

set    "_Red="40;91m""
set  "_Green="40;92m""
set   "_Blue="40;94m""
set  "_White="40;37m""
set "_Yellow="40;93m""

exit /b
)

if not defined _BS for /f %%A in ('"prompt $H&for %%B in (1) do rem"') do set "_BS=%%A %%A"
set "_coltemp=%SystemRoot%\Temp"

set     "Red="CF""
set    "Gray="8F""
set   "Black="00""
set   "Green="2F""
set    "Blue="1F""
set  "Yellow="6F""
set "Magenta="5F""

set    "_Red="0C""
set  "_Green="0A""
set   "_Blue="09""
set  "_White="07""
set "_Yellow="0E""

exit /b

::========================================================================================================================================
cnseatech
 楼主| 发表于 2023-10-29 12:22:40 | 显示全部楼层
sunshiner 发表于 2023-9-26 00:26
**** 作者被禁止或删除 内容自动屏蔽 ****

下载文件只是下载个图片
cnseatech
 楼主| 发表于 2023-10-29 12:23:02 | 显示全部楼层
nmyh 发表于 2023-10-24 12:30
浏览器打开“https://massgrave.dev/ias.ps1”,然后有个地址就是:

然而这个地址国内网络无法访问,需 ...

多试几次就可以了
cnseatech
 楼主| 发表于 2023-11-12 12:43:42 | 显示全部楼层
litm 发表于 2023-11-11 10:40
学习了 感谢分享

不客气,互助分享、共同进步!
mifanu
发表于 2023-11-12 13:19:21 来自手机 | 显示全部楼层
这应该不叫一条命令激活,该叫在线脚本激活。
cnseatech
 楼主| 发表于 2023-11-13 12:49:38 | 显示全部楼层
mifanu 发表于 2023-11-12 13:19
这应该不叫一条命令激活,该叫在线脚本激活。

是的,严格讲是这样的
依水一
发表于 2023-11-14 17:26:19 | 显示全部楼层
这个可以的
您需要登录后才可以回帖 登录 | 快速注册

本版积分规则

手机版|杀毒软件|软件论坛| 卡饭论坛

Copyright © KaFan  KaFan.cn All Rights Reserved.

Powered by Discuz! X3.4( 沪ICP备2020031077号-2 ) GMT+8, 2024-12-22 10:50 , Processed in 0.099157 second(s), 16 queries .

卡饭网所发布的一切软件、样本、工具、文章等仅限用于学习和研究,不得将上述内容用于商业或者其他非法用途,否则产生的一切后果自负,本站信息来自网络,版权争议问题与本站无关,您必须在下载后的24小时之内从您的电脑中彻底删除上述信息,如有问题请通过邮件与我们联系。

快速回复 客服 返回顶部 返回列表