VirtualBox2.2.0不能上网的解决方法

温州城掌柜

I had the same problem yesterday, and I tested so many things!!
I heard that Sun fixed the problem but it will be patched only int the next version.  

Here is two way that I found to resolve the problem:

1. Use Bridged Network:
In the network options of the virtual card, you must change the card type for bridged one.
After, you click on the little screwdriver to setup the briged connection.
You click on the network card that you want to use and it should work.

Note: using briged connection make your virtual machine visible in your network!
2. Give a static address to your Guest:
I could say that the DHCP can't have a new ip address.
So the only way to be able to use NAT is to give it a good address to make it working!

You must run your windows XP guest and change your network configuration to a static address.
Here is the address that I tryed and it worked (Found in the ticket 2405):
IP Address: 10.0.2.15
Subnet Mask 255.255.255.0
Default Gateway: 10.0.2.2
DNS Server: 10.0.2.3
Note: I have tested this solution only 5 minutes... hope that the problem will not come again!

Hope that this post helped you all!

原因是DHCP不能正常工作，是一个bug；
有两种解决方法：
1是使用桥接模式；
2是NAT模式下，设定一个静态IP地址；
IP Address: 10.0.2.15
Subnet Mask 255.255.255.0
Default Gateway: 10.0.2.2
DNS Server: 10.0.2.3

俺用第二种方法，成功上网，[:27:]
有图有真相：




[ 本帖最后由 温州城掌柜 于 2009-4-19 18:04 编辑 ]

gho

还是继续2.1.4

ARLENE

上次在WIN7下不能上网，还以为是系统问题
PS：LINUX版很正常

1e3e

学习了呀

cbk

问下，系统也需要设置 10.0.2.3不？