Installing Enterprise Edition and Remote Administrator

The EQs

1. Click this Radio Button to restart your system.

2. Click “Finish” to complete the installation.


NOTE: Using the net start nod32krn will allow the service to start without rebooting. Then one only has to start AMON manually after the Control Centre is launched (manually).

An error will appear which is normal.
Attached Images

The EQs

Welcome to Nod32, this is the Nod32 splash screen that first appears upon bootup of your system.
Attached Images

The EQs

INSTALLING A NOD32 MIRROR


Place a NEW folder preferably on your "Data drive" (or where data is backed up) and call it "Mirror".

Right click on the new Mirror folder and share it.


NOTE: The mirror folder does not need to be shared, ONLY if you are using UNC and not the http update functionality.
Attached Images

The EQs

Click on the "NOD32 Control Centre".
Attached Images

The EQs

1. Click on "Mirror".

2. Click on "Setup".


NOTE: IMON must greyed out on a Server.
Attached Images

The EQs

1. Click on "Create update mirror".

2. Place a tick in this box.

3. Place a tick in this box.

4. Place a tick in this box so permission is required in order to perform a program component update.

5. Click on "Folder".
Attached Images

The EQs

. Browse to your "Data drive" (or where data is backed up).

2. Click on the "Mirror" folder.

3. Click on "OK".Attached Images

The EQs

1. Place a tick in "Enable access to files via the HTTP protocol".

2. Untick "NOD32 for Windows NT - Sak Interface" unless you are running a NAS (Network Application Storage) Server.

3. Click on "Advanced".
Attached Images

The EQs

1. Place a tick in "Create floppy disk update files".

2. Place a tick in "Create CD update files".

3. Change the "Port used for providing files via HTTP to "8088".

8081 is the default, however Sharepoint services typically use this port as its default. Changing the port to 8088 will eliminate any conflicts as it is not a standard port (unless another application has been changed to use this port).

4. Click on "OK".
Attached Images

The EQs

As you have changed the Mirror settings up comes a prompt box.

1. Click on "Yes".
Attached Images