难道是我装vmware-tools的过程中，有什么不妥的地方？我把安装的整个过程索性全贴出来，哪位高人给指点一下，谢谢
wangyl@linux-fxiq:~> su
口令：
linux-fxiq:/home/wangyl # cd /media
linux-fxiq:/media # ls
.hal-mtab .hal-mtab-lock VMware Tools
linux-fxiq:/media # cd "VMware Tools"/
linux-fxiq:/media/VMware Tools # ls
manifest.txt VMwareTools-8.1.3-203739.tar.gz
linux-fxiq:/media/VMware Tools # mkdir /tmp/test2
linux-fxiq:/media/VMware Tools # cp *gz /tmp/test2
linux-fxiq:/media/VMware Tools # cd /tmp/test2
linux-fxiq:/tmp/test2 # ls
VMwareTools-8.1.3-203739.tar.gz
linux-fxiq:/tmp/test2 # tar zxf *gz
linux-fxiq:/tmp/test2 # ls
VMwareTools-8.1.3-203739.tar.gz vmware-tools-distrib
linux-fxiq:/tmp/test2 # cd vmware-tools-distrib/
linux-fxiq:/tmp/test2/vmware-tools-distrib # ls
bin doc etc FILES INSTALL installer lib vmware-install.pl
linux-fxiq:/tmp/test2/vmware-tools-distrib # ls
bin doc etc FILES INSTALL installer lib vmware-install.pl
linux-fxiq:/tmp/test2/vmware-tools-distrib # ./*pl
A previous installation of VMware Tools has been detected.
The previous installation was made by the tar installer (version 4).
Keeping the tar4 installer database format.
You have a version of VMware Tools installed. Continuing this install will
first uninstall the currently installed version. Do you wish to continue?
(yes/no) [yes] yes
Uninstalling the tar installation of VMware Tools.
Stopping services for VMware Tools
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: done
Virtual Printing daemon: done
Unmounting HGFS shares: done
Guest filesystem driver: done
File /usr/lib/vmware-tools/lib32/libconf/etc/pango/pangorc is backed up to
/usr/lib/vmware-tools/lib32/libconf/etc/pango/pangorc.old.1.
This program previously created the file
/usr/lib/vmware-tools/libconf/etc/gtk-2.0/gtk.immodules, and was about to
remove it. Somebody else apparently did it already.
File /usr/lib/vmware-tools/lib32/libconf/etc/pango/pangox.aliases is backed up
to /usr/lib/vmware-tools/lib32/libconf/etc/pango/pangox.aliases.old.1.
File /usr/lib/vmware-tools/lib32/libconf/etc/gtk-2.0/gdk-pixbuf.loaders is
backed up to
/usr/lib/vmware-tools/lib32/libconf/etc/gtk-2.0/gdk-pixbuf.loaders.old.1.
This program previously created the file
/usr/lib/vmware-tools/libconf/etc/pango/pangorc, and was about to remove it.
Somebody else apparently did it already.
File /etc/vmware-tools/vmware-user.desktop is backed up to
/etc/vmware-tools/vmware-user.desktop.old.1.
File /usr/lib/vmware-tools/lib32/libconf/etc/fonts/fonts.conf is backed up to
/usr/lib/vmware-tools/lib32/libconf/etc/fonts/fonts.conf.old.1.
This program previously created the file
/usr/lib/vmware-tools/libconf/etc/pango/pangox.aliases, and was about to remove
it. Somebody else apparently did it already.
This program previously created the file
/usr/lib/vmware-tools/lib32/libconf/etc/pango/pango.modules, and was about to
remove it. Somebody else apparently did it already.
This program previously created the file
/usr/lib/vmware-tools/libconf/etc/gtk-2.0/gdk-pixbuf.loaders, and was about to
remove it. Somebody else apparently did it already.
File /usr/lib/vmware-tools/lib32/libconf/etc/gtk-2.0/gtk.immodules is backed up
to /usr/lib/vmware-tools/lib32/libconf/etc/gtk-2.0/gtk.immodules.old.1.
Restoring the kernel initrd image.:
Kernel image: /boot/vmlinuz-2.6.31.12-0.2-desktop
Initrd image: /boot/initrd-2.6.31.12-0.2-desktop
Root device: /dev/sda2 (mounted on / as ext4)
Resume device: /dev/sda1
Kernel Modules: thermal_sys thermal scsi_transport_spi mptbase mptscsih mptspi ata_generic ide-core piix ide-pci-generic processor fan crc16 jbd2 ext4
Features: block usb resume.userspace resume.kernel
Bootsplash: openSUSE (800x600)
28141 块
File /etc/sysconfig/mouse is backed up to /etc/sysconfig/mouse.old.1.
Shutting down HAL daemon done
Loading CPUFreq modules (CPUFreq not supported)
Starting HAL daemon done
The removal of VMware Tools 8.1.3 build-203739 for Linux completed
successfully.
Installing VMware Tools.
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc/init.d]
What is the directory that contains the init scripts?
[/etc/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware-tools]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]
The path "/usr/share/doc/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes] yes
The installation of VMware Tools 8.1.3 build-203739 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes] yes
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: done
Virtual Printing daemon: done
Unmounting HGFS shares: done
Guest filesystem driver: done
The module vmmemctl has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vmmemctl to override.
The module vmhgfs has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vmhgfs to override.
The module vmxnet has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vmxnet to override.
The module vmblock has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vmblock to override.
The module vmsync has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vmsync to override.
The module vmci has already been installed on this system by another installer
or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vmci to override.
The module vsock has already been installed on this system by another installer
or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vsock to override.
The module vmxnet3 has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=vmxnet3 to override.
The module pvscsi has already been installed on this system by another
installer or package and will not be modified by this installer. Use the flag
--clobber-kernel-modules=pvscsi to override.
Detected X.org version 7.5.5.
The configuration file /etc/X11/xorg.conf can not be found. Do you want to
create a new one? (yes/no) [yes] yes
Shutting down HAL daemon done
Loading CPUFreq modules (CPUFreq not supported)
Starting HAL daemon done
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux linux-fxiq 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 i686
Build Date: 02 November 2009 12:05:39PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/tmp/vmware-config0/XF86ConfigLog.13444", Time: Wed Apr 21 09:09:40 2010
(EE) Unable to locate/open config file: "/tmp/vmware-config0/XF86Config.13444"
(==) Using default built-in configuration (30 lines)
X is running fine with the new config file.
Creating a new initrd boot image for the kernel.
Kernel image: /boot/vmlinuz-2.6.31.12-0.2-desktop
Initrd image: /boot/initrd-2.6.31.12-0.2-desktop
Root device: /dev/sda2 (mounted on / as ext4)
Resume device: /dev/sda1
Kernel Modules: vmxnet vmxnet3 pvscsi thermal_sys thermal scsi_transport_spi mptbase mptscsih mptspi ata_generic ide-core piix ide-pci-generic processor fan crc16 jbd2 ext4
Features: block usb resume.userspace resume.kernel
Bootsplash: openSUSE (800x600)
28364 块
Checking acpi hot plug done
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: done
Guest operating system daemon: done
Virtual Printing daemon: done
The configuration of VMware Tools 8.1.3 build-203739 for Linux for this running
kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an X server session.
To enable advanced X features (e.g., guest resolution fit, drag and drop, and
file and text copy/paste), you will need to do one (or more) of the following:
1. Manually start /usr/bin/vmware-user
2. Log out and log back into your desktop session; and,
3. Restart your X session.
Enjoy,
--the VMware team |
[复制链接]
发表于 2010-4-21 10:08:34
楼主