eMule 上传速度不超过 1kb

viqcel

所有规则都加了，我是High ID，但上传速度还是不超过 1kb ？？？............怎么办!

把 comodo卸掉又正常了.....

[ 本帖最后由 viqcel 于 2007-5-14 20:52 编辑 ]

coyote420

是HIGH ID的话就不是COMODO防火墙的问题了

viqcel

把   comodo 卸掉就正常了,怎么能说不是  comodo的问题呢!

grantzoo

我也碰到过，好象COMODO对这类软件都有问题

dyw1021

卸掉

ericz

V3不晓得会不会有此情况

tsghj

Emule and bittorent tuttorials « on: June 07, 2006, 03:06:31 AM » EMULE A mini tuttorial of how to open ports for emule First you must go at the "Network Monitor" panel. There you should click with the right button of the mouse and choose "Add rule"->"add" at the new window that appear you should put the following rules: 1. Rule for TCP protocol Action = Allow Protocol = TCP Direction = In Source IP = Any Destination IP = your computer IP adress (you can also use "Any", if you are using a modem and not a router; by this you won't have to change the IP address every time you connect in internet ) Source port = Any Destination port = the port your Emule uses for the TCP connections 2. Rule for UDP protocol Action = Allow Protocol = UDP Direction = In Source IP = Any Destination IP = your IP adress (or "Any" ) Source port = Any Destination port =the port your Emule uses for the UDP connections Bittorent A mini tuttorial of how to open ports for bittorent and similar p2p programs Go at the "Network Monitor" panel and add the following rule Rule for TCP/UDP protocol Action = Allow Protocol = TCP or UDP Direction = In Source IP = Any Destination IP = your computer IP adress (or "Any" ) Source port = Any Destination port = the port your bittorent program uses for the TCP/UDP connections You must move the rules up, over the default rule "Block IP in". ( CPF "reads/applicates" the rules from the top to the bottom) ps. Remember that for CPF "Source IP" is the adress of the computer which sends the data and "Destination IP" is the computer that receives them. When your computer sends data is consindered Source, when receives them is consindered Destination. by pandlouk edit (27/10/2006) For using the search in Kad you must disable the feature "Do protocol analysis" IMPORTANT you will have to disable the UPnP option from the program you use if you want this guide to work properly. If you don't disable it you will have NAT problems. example for azureus: Azureus->Tools -> Options -> Plugins -> UPnP There uncheck "Enable UPnP"

« Last Edit: November 13, 2006, 11:28:35 PM by pandlouk »

coyote420

规则没设置好 我驴一直用着 只要是高ID就没问题
我是这样设置的

bb624

这个墙好是好，就是跟p2p有仇！

lacmiu

关掉COMODO之后呢？
上传慢还有可能是你共享的资源少了噢
现在EMULE已经实现内网穿透了，所以是不是High ID已经不是那么重要了。
我就是LOW ID。
哈哈